Paradigm Reference Studio CC-490 v.5 Merkez Hoparlör
Promosyon Seçimi
Tavsiye Et
Adınız: * 
Emailiniz: * 
Gönderilecek Kişiler: *   
Tavsiye Mesajı:  *   

  Resmi Büyüt
 
Kategori :
Ürün Adı : Paradigm Reference Studio CC-490 v.5 Merkez Hoparlör
Garanti Süresi : 24 Ay
Fiyat : 1.100,00 USD + KDV
Kdv Dahil : 2.384,43 TL
MİKTAR : 1 ADET
AÇIKLAMA : 3 yollu hi-end merkez hoparlör
Adet :
Seçenekler : Black - (2.020,70 TL + KDV)
Rosenut - (2.020,70 TL + KDV)
Cherry - (2.020,70 TL + KDV)
Piano Black - (2.204,40 TL + KDV)
Paradigm Reference Studio CC-490 v.5 Merkez Hoparlör
 Ürün Bilgisi Ürün Yorumları Benzer Ürünler Taksit Seçenekleri Önerileriniz
 
 

 
 
 
Highest Standard of Technological Excellence

Studio speakers offer the highest standard of technological excellence resulting in a breathtaking quality of music reproduction that captures the essence of the original sound.

Equally important is the speakers’ performance in home theater. Movie soundtracks are a complex mix of dialog, music and action effects. This requires a level of articulation and spatial representation that few movie theaters are capable of reproducing. Studio speakers exceed typical high-end home theater sound by expanding the sheer size, scale and dynamics of the acoustic soundstage. While listening to a Studio system The Perfect Vision magazine put it best: “It’s just like being at the movies — except the sound is a lot better.”*

*Nicholas Bedworth, The Perfect Vision on the Studio 100


G-PAL™ Gold-Anodized Pure-Aluminum Domes. Exceptionally rigid low-mass domes with treated textile suspensions ensure remarkably uniform and instantaneous power response. The elevated position of the dome provides better ‘air’ and frequency response that is smooth, pure and clear.


S-PAL™ Satin-Anodized Pure-Aluminum Midrange and Bass / Midrange Cones. Very high stiffness-to-mass ratio and outstanding internal damping. The result? Remarkable midrange clarity, superb extended bass response and freedom from unwanted resonances and distortions.


IMS/SHOCK-MOUNT™ Isolation Mounting System. This unique butyl-rubber driver fastening system found on all Studio Series drivers is a progressive system of critically placed isolation inserts and gaskets that decouple drivers from the speaker enclosure itself. This leading-edge ‘baffle-less’ technology reduces driver / enclosure interactions to inaudible levels.


High-Velocity Low-Noise Aluminum Ports. Bass efficiency and minimum turbulence distortion for cleaner and more articulate bass response.


Beautifully Sculpted Cabinets with Real Wood Veneer Finishes. Add a whole new dimension to the classic appeal of this series. Seven coats of the highest quality lacquer, hand-sanded between coats. Available in four luxurious real wood veneer finishes.

 

SPECIFICATIONS

Design 4-driver, 3-way center channel Crossovers 2nd-order electro-acoustic at 2.1 kHz;2nd-order electro-acoustic at 500 Hz(bass drivers)

High-Frequency Driver 25-mm (1 in) G-PAL™ dome, ferro-fluid damped / cooled, die-cast heatsink chassis,IMS/SHOCK-MOUNT™

Midrange Driver 89-mm (3-1/2 in) S-PAL™ cone, ferro-fluid damped / cooled, 25-mm (1 in) voice-coil,
AVS™ die-cast heatsink chassis,IMS/SHOCK-MOUNT™

Bass Drivers Two 140-mm (5-1/2 in) mineral-filled polypropylene cones, 38-mm (1-1/2 in)voice-coils, AVS™ die-cast heatsink chassis, IMS/SHOCK-MOUNT™

Low-Frequency Extension* 43 Hz (DIN)

Frequency Response:
On-Axis ±2 dB from 65 Hz - 20 kHz
30° Off-Axis ±2 dB from 65 Hz - 18 kHz

Sensitivity - Room / Anechoic 90 dB / 87 dB

Suitable Amplifier Power Range 15 - 200 watts

Maximum Input Power† 150 watts

Impedance Compatible with 8 ohms

Height, Width, Depth 21.1 cm x 48.8 cm x 28.9 cm

Weight (unpacked) 12.2 kg / 27 lb each

Finishes Cherry, Rosenut, Black

Paradigm Stand (sold sep.) J-18C


 
Kapat

Bu site, IdeaSoft® Akıllı E-ticaret Sistemi ile hazırlanmıştır.