ANA SAYFA İNDİRİMLİ ÜRÜNLER YENİ ÜRÜNLER İLETİŞİM ALIŞVERİŞ SEPETİM
Hızlı Arama :
Paradigm Reference SIG-1.5R
Promosyon Seçimi
 
Tavsiye Et
Adınız: * 
Emailiniz: * 
Gönderilecek Kişiler: *   
Tavsiye Mesajı:  *   
 

  Resmi Büyüt
 
Kategori : SIGNATURE V.3 Designer Series
Ürün Adı : Paradigm Reference SIG-1.5R
Garanti Süresi : 24 Ay
Fiyat : 0,00 USD + KDV
Kdv Dahil : 0,00 TL
Adet :
Paradigm Reference SIG-1.5R Paradigm Reference SIG-1.5R
 Ürün Bilgisi Ürün Yorumları Benzer Ürünler Taksit Seçenekleri Önerileriniz

Signature Custom Sound … Our Commitment to Audio Perfection is Written
All Over It!

Moves in-wall / in-ceiling sound beyond the ordinary to the truly extraordinary … Signature Custom sets the ultimate standard for what can be expected, achieved and actually delivered by a speaker system installed in a ceiling.

Full-Perimeter Bracket Design.Unlike typical mounting ears, brackets cover the full diameter or height and width of the speaker chassis to effectively sandwich and strengthen the area around the mounting hole.

Cutting-Edge P-Be™ Pure-Beryllium Domes.Exotic beryllium! The metal of choice for truly ultimate levels of high-frequency performance. A stiffness-to-density ratio superior to metals such as aluminum, titanium and even diamond. Performance is clear, uncolored and completely uncompromised.

Cutting-Edge Co-PAL™ Cobalt-Infused Pure-Aluminum Cones.Combine high stiffness-to-mass ratio with superior internal damping for an even greater degree of accuracy. Advanced Nomex® cloth suspensions and butyl rubber surrounds promote superb and extended excursion.

Cutting-Edge Mineral-Filled Co-Polymer Polypropylene Bass Cones.Superior stiffness-to-mass. Precision-engineered for higher sensitivity, power handling and ultra-low levels of distortion. Massive optimized ceramic ferrite or neodymium magnet / motor structures with focused-field geometry.

High-Strength GRIP™ Glass-Reinforced Injection-Molded Polymer Chassis / Mounting Bracket.Increased strength and design rigidity reduce resonances, vibration and flexing dramatically!

 

SPECIFICATIONS
Design 2-driver, 2-way in-ceiling / in-wall,
GRIP™ chassis / mounting bracket
Crossover 3rd-order electro-acoustic at 2.5 kHz
High-Frequency Driver 25-mm (1 in) P-Be™ dome, rear damping
chamber with ARB™ fins and integrated
heatsink, dual super-neodymium
magnets, die-cast heatsink chassis
Bass / Midrange Driver 210-mm (8 in) Co-PAL™ cone, anodized
solid-aluminum phase plug, 38-mm (1-1/2 in)
dual-layer voice-coil, ceramic / ferrite
magnets, AVS™ die-cast heatsink chassis
Low-Frequency Extension* 37 Hz (DIN)
Frequency Response:
On-Axis
30° Off-Axis
±2 dB from 58 Hz - 45 kHz
±2 dB from 58 Hz - 20 kHz
Sensitivity - Room / Anechoic 92 dB / 88 dB
Suitable Amplifier Power Range 15 - 225 watts
Maximum Input Power† 140 watts
Impedance Compatible with 8 ohms
External Dimensions:
(D or H x W)		 22.6 cm
8-15/16 in
Minimum Mounting Depth** 10.0 cm
3-15/16 in
Cutout Dimensions:
(D or H x W)		 20.0 cm
7-14/16 in
Minimum Internal Volume Required 20 L / 0.70 cu ft
Weight (unpacked) 1.6 kg / 3.5 lb each
Finish White, paintable
Pre-Construction Bracket (sold sep.) PB-8R; retrofit included

* DIN 45 500. Indicates -3 dB in a typical listening room.

† With typical program source, provided the amplifier clips
no more than 10% of the time.

** Depth required is the distance between 1/2˝ drywall, or similar material.

 
Kapat

 


 

Bu site, IdeaSoft® Akıllı E-ticaret Sistemi ile hazırlanmıştır.