ANA SAYFA İNDİRİMLİ ÜRÜNLER YENİ ÜRÜNLER İLETİŞİM ALIŞVERİŞ SEPETİM
Hızlı Arama :
Yorum Yaz
Başlık: * 
Yorum:  * 
Puanı:
 
Tavsiye Et
Adınız: * 
Emailiniz: * 
Gönderilecek Kişiler: *   
Tavsiye Mesajı:  *   
 
Paradigm Reference SA-15R
Promosyon Seçimi
 

  Resmi Büyüt
 
Kategori : SA V.3 Designer Series
Ürün Adı : Paradigm Reference SA-15R
Garanti Süresi : 24 Ay
Fiyat : 0,00 USD + KDV
Kdv Dahil : 0,00 TL
Adet :
Paradigm Reference SA-15R Paradigm Reference SA-15R
 Ürün Bilgisi Ürün Yorumları Benzer Ürünler Taksit Seçenekleri Önerileriniz

MODEL ENHANCEMENTS

 
NEW! Thinner, Sleeker Bezels with more transparent scrim for a cleaner, disappearing aesthetic with increased sonic transparency.
 
 
Full-Perimeter Bracket Design. Unlike typical mounting ears, brackets cover the full diameter or height and width of the speaker chassis to effectively sandwich and strengthen the area around the mounting hole.
 
 
State-of-the-Art G-PAL™ Gold-Anodized Pure-Aluminum Domes. Ferro-fluid cooled and damped. Exceptionally rigid, low-mass domes with treated textile suspensions ensure extremely uniform and instantaneous high-frequency response.
 
 
State-of-the-Art S-PAL™ Satin-Anodized Pure-Aluminum Cones. High stiffness-to-mass ratio. Outstanding internal damping. The result? Remarkable midrange clarity, superb extended bass and tremendous freedom from unwanted resonances and distortions.
 
 
State-of-the-Art Mineral-Filled Co-Polymer Polypropylene Bass Cones. Highly damped and tremendously rigid for tight, well-defined and deep low-frequency response with a weight and authority that does justice to music and movies.
 
 
High-Pressure Ultra-Rigid™ Die-Cast Aluminum Chassis and Mounting Brackets (selected models). Dramatic reduction in resonances and standing waves. Aluminum chassis also serves as a very effective heatsink.
 
 
High-Strength GRIP™ Glass-Reinforced Injection-Molded Polymer Chassis and Mounting Brackets (selected models). Increased strength and the rigid design reduce the problems associated with structural flexibility mentioned earlier in this catalog.
 
 
 

SPECIFICATIONS

Design

2-driver, 2-way in-ceiling / in-wall,
GRIP™ chassis / mounting bracket

Crossover

3rd-order electro-acoustic at 2.5 kHz

High-Frequency Driver

25-mm (1 in) G-PAL™ dome,
die-cast heatsink faceplate

Bass / Midrange Driver

210-mm (8 in) S-PAL™ cone,
38-mm (1-1/2 in) voice-coil,
GRIP™ chassis

Low-Frequency Extension*

37 Hz (DIN)

Frequency Response:
On-Axis
30° Off-Axis


±2 dB from 58 Hz - 22 kHz
±2 dB from 58 Hz - 20 kHz

Sensitivity - Room / Anechoic

92 dB / 88 dB

Suitable Amplifier Power Range

15 - 160 watts

Maximum Input Power†

100 watts

Impedance

Compatible with 8 ohms

External Dimensions:
(D or H x W)

22.6 cm
8-15/16 in

Minimum Mounting Depth**

9.0 cm
3-1/2 in

Cutout Dimensions:
(D or H x W)

20.0 cm
7-14/16 in

Minimum Internal Volume Required

20 L / 0.70 cu ft

Weight (unpacked)

2.2 kg / 4.8 lb each

Finish

White, paintable

Pre-Construction Bracket (sold sep.)

PB-8R; retrofit included

 
Kapat

 


 

Bu site, IdeaSoft® Akıllı E-ticaret Sistemi ile hazırlanmıştır.