Paradigm Reference SA-15R-30

ANA SAYFA İNDİRİMLİ ÜRÜNLER YENİ ÜRÜNLER İLETİŞİM ALIŞVERİŞ SEPETİM

Hızlı Arama :

Ürün Grupları

Kullanıcı Menusu


Email	:
Şifre	:
	Beni Hatırla

[ Yeni Üyelik ] - [ Şifremi Unuttum ]

Resmi Büyüt


Kategori	:	SA V.3 Designer Series
RENK	:

Ürün Adı	:	Paradigm Reference SA-15R-30

Garanti Süresi	:	24 Ay


Fiyat	:	0,00 USD + KDV
Kdv Dahil	:	0,00 TL


Adet	:

MODEL ENHANCEMENTS

NEW! Thinner, Sleeker Bezels with more transparent scrim for a cleaner, disappearing aesthetic with increased sonic transparency.

NEW! Low-Density NLC™ Non-Limiting Corrugated Thermoplastic Elastomer TPE Surround, trickle down technology from our Signature Series. FEA optimized and overmolded onto the polypropylene cone;

NEW! Motor Structure includes a three-split voice coil, thicker top plate and larger ceramic/ferrite magnet.

In concert with the new motor structure (see below) we’ve achieved double the power in these models! + 3dB! The speaker now plays louder. The thermoplastic elastomer is ten times more effective than standard elastomers in damping vibrations and resonances and the corrugations increase peak-to-peak excursion. While we would have loved to have effected this change across models, the Guided Soundfield model was the only model physically able to accommodate the size and quantity of corrugations needed and the larger motor structure.

The new structure further improves low-frequency sound distortion at high excursion while maintaining the much-lauded frequency response of the previous generation. The speaker can play significantly louder now, but without a hint of compression/distortion.

Full-Perimeter Bracket Design. Unlike typical mounting ears, brackets cover the full diameter or height and width of the speaker chassis to effectively sandwich and strengthen the area around the mounting hole.

State-of-the-Art G-PAL™ Gold-Anodized Pure-Aluminum Domes. Ferro-fluid cooled and damped. Exceptionally rigid, low-mass domes with treated textile suspensions ensure extremely uniform and instantaneous high-frequency response.

State-of-the-Art S-PAL™ Satin-Anodized Pure-Aluminum Cones. High stiffness-to-mass ratio. Outstanding internal damping. The result? Remarkable midrange clarity, superb extended bass and tremendous freedom from unwanted resonances and distortions.

State-of-the-Art Mineral-Filled Co-Polymer Polypropylene Bass Cones. Highly damped and tremendously rigid for tight, well-defined and deep low-frequency response with a weight and authority that does justice to music and movies.

High-Pressure Ultra-Rigid™ Die-Cast Aluminum Chassis and Mounting Brackets (selected models). Dramatic reduction in resonances and standing waves. Aluminum chassis also serves as a very effective heatsink.

High-Strength GRIP™ Glass-Reinforced Injection-Molded Polymer Chassis and Mounting Brackets (selected models). Increased strength and the rigid design reduce the problems associated with structural flexibility mentioned earlier in this catalog.

SPECIFICATIONS
Design	Guided Soundfield™ system, 2-driver, 2-way in-ceiling, drivers mounted at 30° relative to mounting surface, GRIP™ chassis / mounting bracket
Crossover	3rd-order electro-acoustic at 2.5 kHz
High-Frequency Driver	25-mm (1 in) G-PAL™ dome, die-cast heatsink faceplate
Bass / Midrange Driver	210-mm (8 in) S-PAL™ cone, 38-mm (1-1/2 in) voice coil, GRIP™ chassis
Low-Frequency Extension*	37 Hz (DIN)
Frequency Response: On-Axis 30° Off-Axis	±2 dB from 58 Hz – 22 kHz ±2 dB from 58 Hz – 17 kHz
Sensitivity - Room / Anechoic	92 dB / 88 dB
Suitable Amplifier Power Range	15 - 160 watts
Maximum Input Power†	100 watts
Impedance	Compatible with 8 ohms
External Dimensions: (D or H x W)	29.6 cm 11-10/16 in
Minimum Mounting Depth**	14.3 cm 5-10/16 in
Cutout Dimensions: (D or H x W)	27.0 cm 10-10/16 in
Minimum Internal Volume Required	20 L / 0.70 cu ft
Weight (unpacked)	2.9 kg / 6.4 lb each
Finish	White, paintable
Pre-Construction Bracket (sold sep.)	PB-10R; retrofit included