ANA SAYFA İNDİRİMLİ ÜRÜNLER YENİ ÜRÜNLER İLETİŞİM ALIŞVERİŞ SEPETİM
Hızlı Arama :
Paradigm AMS-LCR
Promosyon Seçimi
 
Tavsiye Et
Adınız: * 
Emailiniz: * 
Gönderilecek Kişiler: *   
Tavsiye Mesajı:  *   
 

  Resmi Büyüt
 
Kategori : AMS V.4 Designer Series
Ürün Adı : Paradigm AMS-LCR
Garanti Süresi : 24 Ay
Fiyat : 0,00 USD + KDV
Kdv Dahil : 0,00 TL
Adet :
Paradigm AMS-LCR Paradigm AMS-LCR
 Ürün Bilgisi Ürün Yorumları Benzer Ürünler Taksit Seçenekleri Önerileriniz
 
Buried Treasures

Step up to superior high-frequency response, exceptional midrange clarity and definition and even better bass performance. Not to mention the most rigid high-strength chassis and mounting brackets on the market.

 
Full-Perimeter Bracket Design.Unlike typical mounting ears, brackets cover the full diameter or height and width of the speaker chassis to effectively sandwich and strengthen the area around the mounting hole.
 
 
Advanced High-Power S-PAL™ Satin-Anodized Pure-Aluminum Domes.Ferro-fluid damped and cooled. The low-mass tweeter domes with treated textile suspensions are exceptionally rigid. Extremely uniform and instantaneous power response.
 
 
Advanced High-Power Mineral-Filled Co-Polymer Polypropylene Cones.Large, computer-optimized magnets and high-power motor structures promote natural and detailed sonic reproduction with outstanding extended bass response.
 
 
High-Pressure Die-Cast Aluminum Chassis and Mounting Brackets(selected models). The supremely rigid die-cast structure reduces resonances and standing waves, while the aluminum does double-duty as a heatsink.
 
 
High-Strength GRIP™ Glass-Reinforced Injection-Molded Polymer Chassis and Mounting Brackets(selected models). Design strength/rigidity reduces the problems of vibrations and resonances.

 
SPECIFICATIONS
Design 5-driver, 2-1/2-way in-wall
left / center / right, die-cast
chassis / mounting bracket
Crossovers 2nd-order electro-acoustic at 2.0 kHz;
2nd-order electro-acoustic at 700 kHz
(outside bass drivers)
High-Frequency Driver 25-mm (1 in) S-PAL™ dome,
die-cast heatsink faceplate
Bass / Midrange Drivers Two 115-mm (4-1/2 in) mineral-filled
polypropylene cones
Bass Drivers Two 115-mm (4-1/2 in) mineral-filled
polypropylene cones
Low-Frequency Extension* 75 Hz (DIN)
Frequency Response:
On-Axis
30° Off-Axis
±2 dB from 105 Hz - 22 kHz
±2 dB from 105 Hz - 20 kHz
Sensitivity - Room / Anechoic 91 dB / 87 dB
Suitable Amplifier Power Range 15 - 150 watts
Maximum Input Power† 100 watts
Impedance Compatible with 8 ohms
External Dimensions:
(D or H x W)		 61.3 cm x 15.4 cm
24-2/16 in x 6-1/16 in
Minimum Mounting Depth** 6.7 cm
2-10/16 in
Cutout Dimensions:
(D or H x W)		 58.7 cm x 13.0 cm
23-2/16 in x 5-2/16 in
Minimum Internal Volume Required 16 L / 0.56 cu ft
Weight (unpacked) 4.5 kg / 9.9 lb each
Finish White, paintable
Pre-Construction Bracket (sold sep.) PB-5x23; retrofit included



 

* DIN 45 500. Indicates -3 dB in a typical listening room.

† With typical program source, provided the amplifier clips
no more than 10% of the time.

** Depth required is the distance between 1/2˝ drywall, or similar material.

 
Kapat

 


 

Bu site, IdeaSoft® Akıllı E-ticaret Sistemi ile hazırlanmıştır.