Paradigm AMS-150R-30

ANA SAYFA İNDİRİMLİ ÜRÜNLER YENİ ÜRÜNLER İLETİŞİM ALIŞVERİŞ SEPETİM

Hızlı Arama :

Ürün Grupları

Kullanıcı Menusu


Email	:
Şifre	:
	Beni Hatırla

[ Yeni Üyelik ] - [ Şifremi Unuttum ]

Resmi Büyüt


Kategori	:	AMS V.4 Designer Series

Ürün Adı	:	Paradigm AMS-150R-30

Garanti Süresi	:	24 Ay


Fiyat	:	0,00 USD + KDV
Kdv Dahil	:	0,00 TL


Adet	:

MODEL ENHANCEMENTS

NEW! Thinner, Sleeker Bezels with more transparent scrim for a cleaner, disappearing aesthetic with increased sonic transparency.

NEW! Low-Density NLC™ Non-Limiting Corrugated Thermoplastic Elastomer TPE Surround, trickle down technology from our Signature Series. FEA optimized and overmolded onto the polypropylene cone. The new surrounds allowed us to achieve double the power in The speaker now plays louder. +3dB output. The thermoplastic elastomer is ten times more effective than standard elastomers in damping vibrations and resonances and the corrugations increase peak-to-peak excursion. While we would have loved to have effected this change across models, the Guided Soundfield model was the only model physically able to accommodate the size and quantity of corrugations needed and the larger motor structure.

Now Plays Louder! +3 dB output!

Full-Perimeter Bracket Design. Unlike typical mounting ears, brackets cover the full diameter or height and width of the speaker chassis to effectively sandwich and strengthen the area around the mounting hole.

Advanced High-Power S-PAL™ Satin-Anodized Pure-Aluminum Domes. Ferro-fluid damped and cooled. The low-mass tweeter domes with treated textile suspensions are exceptionally rigid. Extremely uniform and instantaneous power response.

Advanced High-Power Mineral-Filled Co-Polymer Polypropylene Cones. Large, computer-optimized magnets and high-power motor structures promote natural and detailed sonic reproduction with outstanding extended bass response.

High-Pressure Die-Cast Aluminum Chassis and Mounting Brackets (selected models). The supremely rigid die-cast structure reduces resonances and standing waves, while the aluminum does double-duty as a heatsink.

High-Strength GRIP™ Glass-Reinforced Injection-Molded Polymer Chassis and Mounting Brackets (selected models). Design strength/rigidity reduces the problems of vibrations and resonances.

SPECIFICATIONS
Design	Guided Soundfield™ system, 2-driver, 2-way in-ceiling, drivers mounted at 30° relative to mounting surface, die-cast chassis / mounting bracket
Crossover	2nd-order electro-acoustic at 2.5 kHz
High-Frequency Driver	25-mm (1 in) S-PAL™ dome, die-cast heatsink
Bass / Midrange Driver	210-mm (8 in) mineral-filled polypropylene cone
Low-Frequency Extension*	45 Hz (DIN)
Frequency Response: On-Axis 30° Off-Axis	±2 dB from 60 Hz - 22 kHz ±2 dB from 60 Hz - 16 kHz
Sensitivity - Room / Anechoic	91 dB / 87 dB
Suitable Amplifier Power Range	15 - 110 watts
Maximum Input Power†	80 watts
Impedance	Compatible with 8 ohms
External Dimensions: (D or H x W)	29.6 cm 11-10/16 in
Minimum Mounting Depth**	14.3 cm 5-10/16 in
Cutout Dimensions: (D or H x W)	27.0 cm 10-10/16 in
Minimum Internal Volume Required	20 L / 0.70 cu ft
Weight (unpacked)	2.3 kg / 5 lb each
Finish	White, paintable
Pre-Construction Bracket (sold sep.)	PB-10R; retrofit included