Yorum Yaz
Başlık: * 
Yorum:  * 
Puanı:
Tavsiye Et
Adınız: * 
Emailiniz: * 
Gönderilecek Kişiler: *   
Tavsiye Mesajı:  *   
Paradigm Monitor 7 v.6 - 1 ÇİFT
Promosyon Seçimi

  Resmi Büyüt
 
Kategori :
Ürün Adı : Paradigm Monitor 7 v.6 - 1 ÇİFT
Garanti Süresi : 24 Ay
Fiyat : 1.271,19 TL + KDV
Kdv Dahil : 1.500,00 TL
Adet :
Paradigm Monitor 7 v.6 - 1 ÇİFT
 Ürün Bilgisi Ürün Yorumları Benzer Ürünler Taksit Seçenekleri Önerileriniz

No Need to Give Up Fidelity to Get Loud!

Paradigm’s Monitor Series, with its proprietary SuperDrive™ technology, combines very high-efficiency with very high output and ultra-low distortion. Monitor speakers compete directly with the efficiency and output of major brands of horn speakers—they not only play as loud, their sound is authentically high-end. Even with moderately powered amplifiers, Monitor speakers deliver truly breathtaking performance. And in classic Paradigm tradition, unparalleled value too!


Monitor Series center channels are magnetically shielded and timbre-matched with all other Monitor Series speakers to ensure superior performance for music and home theater.



Advanced High-Efficiency M-ICP™ Minimum-Mass Injection-Molded Co-Polymer Bass/Midrange Cones
teamed with advanced motor structures and oversized magnets provide exceptional sensitivity, superb power handling and truly tremendous output.

Advanced High-Power Carbon-Infused Bass Cones
, highly damped and extremely rigid, provide tight, superbly defined and incredibly well-extended bass response.

Elevated Tweeter and Advanced WaveGuide™ Chassis
  foster exceptionally uniform response across a wide, deep listening window.

Low-Diffraction Magnetic Grilles
  fit like a glove! Perfectly centered over the baffle, when in position these stay-tight grilles won’t move ‘til you move them. Outrigger Feet on Floorstanding Models give added stability and stylish good looks. Nickel-plated screws add a high-tech touch.

Advanced H-PTD™ High-Efficiency Pure-Titanium Domes
  with ferro-fluid cooling encourage a winning combination of dome rigidity and low mass. Harmonics and air possess breathtaking clarity and accuracy. The result is performance that rivals far more expensive high-end speaker designs.

High-Pressure Die-Cast Aluminum or GRIP™ Glass - Reinforced Injection-Molded Polymer Chassis (varies by model)
are exceptionally rigid to eliminate flexing and ringing, while also functioning as heatsinks for greater power handling.


SPECIFICATIONS


Design 4-driver, 2-1/2-way bass reflex,quasi-3rd-order resistive port

Crossovers 3rd-order electro-acoustic at 2.0 kHz,2nd-order electro-acoustic at 700 Hz (lower bass drivers)

High-Frequency Driver 25-mm (1 in) H-PTD™ dome

Bass / Midrange Driver 140-mm (5-1/2 in) M-ICP™ cone,25-mm (1 in) voice-coil, GRIP™ chassis

Bass Drivers Two 140-mm (5-1/2 in) carbon-infused polypropylene cones, 25-mm (1 in) voice-coils, GRIP™ chassis
Low-Frequency Extension* 41 Hz (DIN)

Frequency Response:
On-Axis
30° Off-Axis
±2 dB from 54 Hz - 20 kHz
±2 dB from 54 Hz - 15 kHz

Sensitivity - Room / Anechoic 94 dB / 91 dB

Suitable Amplifier Power Range 15 - 180 watts

Maximum Input Power† 130 watts

Impedance Compatible with 8 ohms

Height, Width, Depth 93.8 cm x 16.5 cm x 29.8 cm

Weight (unpacked) 16.7 kg / 37 lb each

Finishes Cherry, Rosenut, Black Ash, Wengé


* DIN 45 500. Indicates -3 dB in a typical listening room.


† With typical program source, provided the amplifier clips

no more than 10% of the time.

Listed heights for floorstanding models include spikes and outrigger feet.


Listed widths for floorstanding models exclude outrigger feet.

 
Kapat

Bu site, IdeaSoft® Akıllı E-ticaret Sistemi ile hazırlanmıştır.